Abit BE6 User Manual page 98

F-2
During the Starting DOS... procedure, press SHIFT (BY-PASS) key, to skip
CONFIG.SYS and AUTOEXEC.BAT; edit CONFIG.SYS with a text editor,
and in function the line that loads the Sound Card Driver, add a remark REM, in
order to disable the Sound Card Driver. See the example below.
CONFIG.SYS:
DEVICE=C:\DOS\HIMEM.SYS
DEVICE=C:\DOS\EMM386.EXE HIGHSCAN
DOS=HIGH, UMB
FILES=40
BUFFERS=36
REM DEVICEHIGH=C:\PLUGPLAY\DWCFGMG.SYS
LASTDRIVE=Z
Restart the system. If the system starts and does not reset, you can be sure that
the problem is due to the Sound Card Driver. Note down the Sound Card model,
motherboard model, BIOS identification number on the technical support file
(refer to main instructions), and describe the problem in the space provided.
***
-- Main instructions... -- -- --
To fill in this "Technical Support Form", refer to the step-by-step instructions given below:
*
1 . MODEL: Note the model number given in your user's manual.
Example: BE6, BX6, BH6, etc...
*
2 . Motherboard model number (REV): Note the motherboard model number labeled on
the motherboard as "REV:*.**".
Example: REV: 1.01
*
. BIOS ID and Part Number: See next page example.
3
BE6
Appendix F