Abit BE6 User Manual page 87

Installing the driver for Ultra ATA/66
If you have a SCSI CDROM, you have to set the "Boot Sequence" as "EXT,C,A" and
the "Boot Sequence EXT Means" as "SCSI" in the "BIOS Features Setup"
NOTE
Step 3: Insert the Windows NT installation
CD (must be bootable) into your CD-ROM.
Press the "F6" key immediately when the
message "Setup
computer's hardware configuration..."
appears.
Step 4: Press "S" to specify an additional
device (Ultra ATA/66 IDE controller)
Step 5: Press "ENTER" to select "Others"
Step 6: Insert the Ultra ATA/66 Driver
diskette into drive A, and press "ENTER".
D-7
is inspecting your
User's Manual