Load Setup Defaults; Load Bios Defaults; Password Setting - Abit LM6E Pentium II User Manual

Introduction of BIOS

(7) Load Setup Defaults

Setup defaults are the settings that allow your system to operate at its
highest performance. When you choose this option, the following message is
displayed:
"Load Setup Defaults (Y/N)? N"
If you want to use BIOS Setup default values, press "Y", than <Enter> to
complete the loading of the settings for best performance.
You should first load the best settings, than enter the CPU Soft Menu to
set up CPU parameters, otherwise the BIOS will replace set parameters by
default parameters.

(8) Load BIOS Defaults

BIOS defaults are the reference settings that allow your system to work at
a comparatively low performance. When you choose the option, the following
message is displayed:
If you want to use BIOS default values, press "Y", than <Enter>.

(9) Password Setting

This option allows you to set a password required to start the system
(System) or to access to the BIOS (Setup).
After you have set a password through the PASSWORD SETTING
option, you can enter the Security Option in the "BIOS Features Setup Menu"
to select the security level in order to prevent any unauthorized access.
Password setting procedure:
When you choose the Password setting option, the following
message is displayed:
"Load BIOS Defaults (Y/N)? N"
"Enter Password:"
3-33