Appendix Ethe Thermal Cable - Abit BE6 User Manual

The thermal cable E-1
Appendix E The thermal cable
We provide a thermal cable in the motherboard package (see the figure below). This thermal
cable is for you to detect the CPU temperature. You can attach one end of the two-threaded
thermal cable (A) to the motherboard's CON2 header (see the figure below), then tape the
other end of thermal cable (B) onto the CPU's heat sink. When you tape the thermal cable
onto the CPU's heat sink, we suggest you tape it as near the CPU chipset as possible and
avoid having it near the CPU FAN.
After you have installed the thermal cable, you will see the detected temperature in the BIOS
Setup and Winbond Hardware Doctor Utility.
User's Manual