Password Setting - Abit AX5 Instruction Booklet

3-30
´ Password Setting
This option allows you to set a password required to start the system
(System) or to access to the BIOS (Setup).
After you have set a password through the PASSWORD SETTING option,
you can enter the Security Option in the "BIOS Features Setup Menu" to select
the security level in order to prevent any unauthorized access.
Password setting procedure:
When you choose the Password setting option, the following message
is displayed:
Type your password. When complete, press <Enter>. The following
message is displayed:
Type your password again. When complete, press <Enter>. The password
setting is completed.
Password clearing procedure:
When you select the Password setting option, the following message is
displayed:
Press <Enter>, the message "Password Disable" is displayed. Press a key.
The password clearing procedure is completed.
Notice: Do not forget your password. If you forget it, you will have to
open the computer case, clear the contents of the CMOS, and
boot the system up again. But doing this, you must reset all your
settings.
"Enter Password:"
"Confirm Password:"
"Enter Password:"
Chapter 3