Pillow Care; Cleaning The Spa Interior; Cover Care And Maintenance - Jacuzzi J-200 Owner's Manual

12.3

Pillow Care

Remove and clean each headrest by gently grasping both ends in each
hand and pulling upward to release each pillow "snap." To reinstall,
simply "snap" each pillow back into place. Clean as needed with soapy
water using a cloth or soft-bristle brush. Always remove the pillows when
adding chemical shock treatment to the spa water. The pillows can be
returned to the spa when the sanitizer reading is stable as recommended
on the inside cover of the manual.
12.4

Cleaning The Spa Interior

To preserve the sheen of your spa's surface, it is crucial that you avoid
using abrasive cleaners or cleaners which have adverse chemical effect
on the surface. If you are not certain as to the suitability of a particular
cleanser, consult your authorized Jacuzzi dealer. Regardless of the
cleanser used, use extreme care to assure that no soap residue is left on
the surface. This could cause severe sudsing when the spa is refilled.
12.5

Cover Care and Maintenance

Covers distributed by Jacuzzi Hot Tubs have PROLAST™/PROLAST™
Extreme encasement. The PROLAST™/PROLAST™ Extreme
encasement also referred to as the cover "skin" is attractive and durable.
Regular monthly cleaning is strongly recommended and may increase
the longevity of your cover. Jacuzzi chemicals are for use in the U.S.
only.
Note: It is highly recommended that you DO NOT put the seam over the
control panel. This will cause premature failure of the control system.
A. To Clean and Care for the Cover
1. Use a garden hose to remove any debris.
2. Using a large sponge or soft bristle brush, use diluted or mild soap to
gently scrub the top.
3. Rinse and clean and do not allow soap to dry on the cover. Do not
use soap on the underside of the cover.
4. Do not use any solvents, abrasive cleaners or strong
detergents. Do not use products that contain silicone or
alcohol.
B. Additional Care and Maintenance Instructions:
1. Debris can accumulate on the spa cover. Removal of snow or other
debris will help to avoid breakage of the foam cores.
2. Be sure to lock the cover straps to secure the cover from unwanted
or accidental entry.
3. Do not place heavy objects on the cover.
4. Do not walk, sit or stand on the cover.
5. Do not drag or use the flaps/skirt or the cover lock straps to remove
the cover.
6. Use only recommended cover lift systems.
7. Use only chemicals and cleaners recommended by Jacuzzi.
J-200
Figure A
43