Paging - 3Com 1102B - NBX Business Phone VoIP Telephone Manual

Paging

3 To notify another user about the parked call:
a From an NBX Business Telephone, select an Access button that is
assigned for placing telephone calls, and dial the user's extension, or
use the paging feature. See
b From an NBX Basic Telephone, press the hook switch. When you hear
the dial tone, dial the user's extension, or use the paging feature. See
"Paging" next for details.
To retrieve a parked call:
1 Pick up the handset of any telephone on the system.
2 Dial the Call Park extension that was assigned to the call.
Depending on your location and equipment, you can broadcast a
message in one of three ways, as described in
1 Pick up the handset.
2 Dial the paging extension as shown in
3 Speak into the NBX Telephone handset and then hang up.
Do not press the Feature button before you dial the Paging extension.
Table 13 Paging Extension
Feature
External Paging
Broadcast an announcement over a
public address system that has a
paging amplifier and speaker
system that is connected to your
NBX system
Internal Paging
Broadcast an announcement
through the speakers on all NBX
Business Telephones on your system
Simultaneous Paging
Broadcast an announcement
externally and internally at the
same time
"Paging" next for details.
Table
Table 13).
NBX 100
(default extension)
620
621
®
622
Paging 73
13.
SuperStack 3 NBX
(default extensions)
6200
6201
6202