Lanier 3730 Operating Instructions Manual page 67

G
Display the number of the Group
you want to register (1 to 5).
Enter the group number with the
number keys, or search using 0 or
1.
Note
❒ If you make a mistake, press the
{Cancel} key and try again.
❒ If a group has already been
stored, the contents are dis-
played. Press 0 or 1 to select a
group number that is not pro-
grammed, and then press the
{OK} key.
❒ If a group is programmed, but
no name is specified, the group
number only is displayed on the
lower line of the display.
H
Specify the destination using one
of the following three methods:
Enter the fax number with the
number keys.
Press a Quick Dial key.
Press the {Speed Dial} key, and
then enter a Speed Dial number.
I
Press the {OK} key.
The destination is programmed.
J
Press the 0 or 1 to select " Add "
or " Exit ".
K
Press the {OK} key.
If you selected " Exit ", go to step M.
L
Repeat step G to K for all the des-
tinations you want to register in
the Group.
M
Enter the Group name.
Note
❒ If the Group name is already
registered, it is shown on the
display. If you wish to change
the Group name, press the
{Clear/Stop} key, and then enter
another name.
N
Press the {OK} key to register the
Group.
O
Press 0 or 1 to select "Yes" or
"No" to be programmed in the
Quick Dial key. Then press the
{OK} key.
If you selected " No ", go to step R.
P
Press the Quick Dial key you
want to register in the Group.
Groups
3
61