Lanier 3730 Operating Instructions Manual page 34

Faxing
C
Select any scan settings you re-
quire. See p.34 "Scan Settings".
D
Dial. If you wish to send the same
message to more than one desti-
nation, press the {OK} key, and
then dial another destination. Re-
peat this step for all destinations.
2
If you make a mistake, press the
{Clear/Stop} key, and then enter the
correct number again.
Note
❒ When specifying a destination
using a Quick Dial, the destina-
tion is added even if you did not
press the {OK} key.
Reference
p.36 "Dialing"
E
Press the {Start} key.
The machine starts scanning the
original.
The machine calls the destination.
The name or fax number which is
programmed as the Own Name or
Own Fax Number at the other end
is shown on the top of the display.
28
Reference
p.43 "Own Name/Fax Head-
er/Own Fax Number"
After transmission, the machine
will return to standby display.