Setting Thick Paper Or Ohp Transparencies - Savin C2410 Reference Manual

Setting thick paper or OHP
transparencies
Important
❒ Set the paper type using the dis-
play panel when printing on thick
paper or OHP transparencies from
the bypass tray.
❒ If bidirectional communication is
disabled, set the paper type in the
bypass tray using the printer driv-
er, according to the setting made
on the display panel.
Note
❒ Insert OHP transparencies in the
K orientation.
❒ Paper settings can also be set using
the printer driver. The following
procedures are not necessary
when setting paper sizes using the
printer driver.
❒ When the printer driver is not used,
make settings using the display
panel.
Reference
For printer driver settings, see the
printer driver Help.
Setting Paper on the Bypass Tray
A A A A
Press the { { { { User Tools/Counter} } } } key
on the control panel.
B B B B
Press [System Settings].
C C C C
Press the [Tray Paper Settings] tab.
D D D D
Press [T T T T Next] to scroll through the
list.
E E E E
Press [Paper Type: Bypass tray].
F F F F
Select [OHP] or [Thick Paper]
G G G G
Press [OK].
The paper type selected is dis-
played.
H H H H
Press the { { { { User Tools/Counter} } } } key.
Note
❒ The settings made will remain
valid until they are reset again.
After printing on OHP trans-
parencies or thick paper, make
sure to clear settings for the next
user.
1
17