When Copying Onto Ohp Transparencies Or Thick Paper - Savin C2410 Copy Reference Manual

Copying
D Enter the horizontal size of the
paper using the number keys,
and then press [#].
Note
❒ If [Horiz.mm] is not highlight-
ed, press [Horiz.mm].
❒ To register the custom size
2
entered, press [Program], and
then press [Exit].
E Press [OK].
When copying onto special paper
A Press the { { { { #} } } } key.
B Select paper type in "Special
paper".
C Press [OK].
D D D D
Place the originals, and then press
the { { { { Start} } } } key.
Note
❒ When the Sort function is set,
press the { { { { #} } } } key after all origi-
nals have been scanned.
E E E E
When your copy job is finished,
press the { { { { Clear Modes} } } } key to
clear the settings.
24
When copying onto OHP
Transparencies or Thick Paper
To make copies onto OHP transpar-
encies or thick paper, you need to
specify the paper type and size. See
p.23 "When copying onto standard
size paper", p.23 "When copying onto
custom size paper".
Important
❒ Use only recommended OHP trans-
parencies.
Note
❒ The print speed when copying
onto OHP transparencies or thick
paper is slower than when copying
onto plain paper.
A A A A
Open the bypass tray, and then
adjust the guides to the paper
size.
B B B B
Gently insert the OHP transpar-
encies or thick paper face down
until the beeper sounds.
Important
❒ When copying onto OHP trans-
parencies, make sure that the
cut positions are set properly.
❒ To avoid paper misfeeds, fan
the paper before loading it in
the tray.
C C C C
Press the { { { { #} } } } key.
D D D D
Select [OHP Sheet] or [Thick Paper].
E E E E
Select the paper size.