Direct Keypad Dialling - Sharp FO-2150 Operation Manual

Direct Keypad Dialling

You can also enter a full number with the number keys and then press
the START key to begin dialling. You can use this method to dial a
full number when you don't need to speak to the other party before
faxing.
1
Load the document(s).
The display will show:
READY TO SEND
Set the resolution and/or contrast if
desired.
2
Enter the number of the receiving
machine by pressing the numeric keys.
If a pause is required between any
of the digits to access a special
service or an outside line, press the
REDIAL key. The pause will
appear as a hyphen. Several pauses
can be entered in a row.
3
Check the display. If the number of
the receiving machine shown is
correct, press the START key.
If it is not correct, press the STOP
key to backspace and clear one digit
at a time, and then re-enter the
correct digit(s).
Sending a Fax by Automatic Dialling
2-17