Direct Keypad Dialling - Sharp FO-DC500 Facsimile Operation Manual

Direct Keypad Dialling

You can also enter a full number with the number keys and then press
to begin dialling.
1
Load the document(s). (Note: If
desired, you can load the document
after dialling in Step 2, below.)
SEND READY will appear in the
display.
RESOLUTION
•
Press
set the resolution and contrast if
needed.
•
To send the document ahead of other documents waiting for transmission,
PRIORITY
press
•
To send the document directly from the feeder (not through memory), press
DOCUMENT
. (Flip up the Rapid Key overlay if it is down.)
M/?
2
Enter the number of the receiving machine by pressing the numeric
keys.
•
If a pause is required between any of the digits to access a special service
or an outside line, press
appear as a hyphen. Several pauses can be entered in a row.
3
Check the display. If the number of the receiving machine shown is
correct, press
•
If it is not correct, press
and then re-enter the correct digit(s).
CONTRAST
and/or
.
REDIAL
(two seconds per pause). The pause will
START/
.
ENTER
STOP
to backspace and clear one digit at a time,
Sending a Fax by Automatic Dialling
to
START/
ENTER
49