Broadcasting Using A Group Key - Sharp FO-2150 Operation Manual

5
Press the START key. Transmission
will begin.
A Transaction Report is
automatically printed out after
Broadcasting is completed. Check
the "Note" column of the report to
see if any of the locations are
marked "Busy" or have a
communication error code. If so,
send the document to those locations
again.

Broadcasting using a Group Key

If the fax machines to which you want to broadcast have all been
programmed into one Group Key, you can perform the broadcasting
operation using the following simplified procedure:
1
Load the document(s).
Set the resolution and/or contrast if
desired.
2
Press the appropriate Group Key.
Transmission will begin.
Broadcasting
16/G1
35
(Example)
8-5