Timer Operations; Setting A Timer Operation - Sharp FO-2150 Operation Manual

Timer Operations

The Timer function allows you to set a transmission and/or polling
operation to be performed automatically at a time you specify. One
transmission operation and one polling operation can be set at any one
time, and the times they will be performed can be specified up to a
week in advance.
As an example, you can use this function to take advantage of
off-peak telephone rates without having to be there when the operation
is performed.
Note: Only a Speed Dial number can be used to dial the receiving
machine.

Setting a timer operation

1
Press the keys shown at right.
TIMER MODE will appear in the
display.
2
Press # to set a transmission operation
(SEND MODE), or * to set a polling
operation (POLLING MODE).
3
Press 1 to select SET.
4
Enter the time at which you want the
operation to take place in 24-hour
format (2 digits for the hour and 2
digits for the minute).
or
Example: 9:25
8-21