Loading The Document - Sharp FO-2150 Operation Manual

Loading the Document

Up to 20 pages can be placed in the feeder at one time. The pages will
automatically feed into the machine starting from the bottom page.
If you need to send or copy more than 20 pages, place the
additional pages gently and carefully in the feeder just before the
last page is scanned. Do not try to force them in, as this may cause
double-feeding or jamming.
If your document consists of several large or thick pages which
must be loaded one at a time, insert each page into the feeder as
the previous page is being scanned. Insert gently to prevent
double-feeding.
1
Adjust the document guides to the
width of your document.
2
Place the document face down and
push it gently into the document
feeder. The top edge of the document
should enter the machine first.
The feeder will draw the leading
edge of the document into the
machine. The display will show:
READY TO SEND
3
Proceed with the fax, copy, or scan
operation.
2-4
Important: To prevent the
document from skewing, be sure
the document is straight in the
feeder and the document guides
touch each side of the document.