Storing Fax And Telephone Numbers For Automatic Dialling - Sharp FO-2150 Operation Manual

Storing fax and telephone numbers for Automatic Dialling

1
Press these keys:
The display will show:
2
Press 1 to select SET.
The display will show:
3
Enter a two-digit Speed Dial number by pressing the number keys
(01 to 38 for Rapid Key Dialling, 39 to 99 for Speed Dialling).
4
Enter the fax or voice number by pressing the number keys (max. of
32 digits including pauses). (Note: A space cannot be entered.)
If you make a mistake, press the HOLD/SEARCH key to move
the cursor back to the mistake and then enter the correct number.
The new number will replace the old number.
If a pause is required between any of the digits to access a special
service or an outside line, press the REDIAL key. The pause will
appear as a hyphen. Several pauses can be entered in a row.
5
Press the START key.
Sending a Fax by Automatic Dialing
FAX/TEL # MODE
FAX/TEL # SET
ENTER SPEED #
(Example)
(Example)
2-11