Table of Contents
Advertisement
Chapter 14 Quality of Service (QoS)
Table 75 QoS > Meter (continued)
LABEL
Choose one
type of profile
to create
Set profile
name and
attributes
Apply
14.4 The ALD Configuration Screen
The Algorithimic Dropper (ALD) profile decides the probability of dropping the
packets. Setting the condition of an ALD analyzes the percentage as whether the
incoming packets will be dropped or not.
Click QoS > ALD to display the ALD Configuration screen. Enter the desired
name and specific values into the criteria fields to create the estimation of the
drawing for the packet dropping probabilities.
Figure 103 QoS > ALD
168
DESCRIPTION
Select a type of QoS meter that you want to create. You can select A
srtcm Profile, A trtcm Profile or A tokenbucket Profile.
See
Section 14.7.6 on page 176
types.
Enter the name and parameters for the meter that you want to configure.
The parameters may vary according to the meter you select.
Click this to save your changes.
for more information on the QoS meter
P-794H User's Guide
Advertisement
Table of Contents
