Table of Contents
Advertisement
16.2.1 Add/Edit IP Route
The following screen shows if you click Create new IP V4Route or Advanced
Options. in the Use this screen to configure the required information for a static
route.
Figure 129 Add/Edit IP Route
The following table describes the labels in this screen.
Table 92 Add/Edit IP Route
LABEL
Destination
Gateway
Netmask
Cost
Interface
Advertise
Reset
Apply
Cancel
P-794H User's Guide
DESCRIPTION
This parameter specifies the IP network address of the final destination.
Routing is always based on network number.
This is the IP address of the gateway. The gateway is a router or switch
on the same network segment as the device's LAN or WAN port. The
gateway helps forward packets to their destinations.
This parameter specifies the IP network subnet mask of the final
destination.
Enter the cost of transmission for routing purposes.
Select the interface through which the traffic is sent.
Select true if you want the route to be advertised via RIP. If not, select
false.
Click this to restore your previously saved settings.
Click this to save your changes.
Click this to return to the previous screen without saving.
Chapter 16 IP Routes
201
Advertisement
Table of Contents
