Table of Contents
Advertisement
The following table describes the fields in this screen.
Table 34 Tcp Mss Clamp
LABEL
TCP MSS Clamp
Change
Reset
6.7.3 Edit RIP Versions
The RIP version controls the format and the broadcasting method of the RIP
packets that the P-794H sends (it recognizes both formats when receiving). In this
screen, you can configure whether you want to receive/send RIP V1/V2 routing
information packets. You can also decide if multicast packets can be sent. See
page 72
for more information about RIP versions.
Click the Edit Rip Versions tab in the LAN Connections > Advanced screen.
Figure 47 Edit Rip Versions
The following table describes the fields in this screen.
Table 35 Edit Rip Versions
LABEL
Accept V1
Accept V2
Send V1
Send V2
P-794H User's Guide
DESCRIPTION
Select true if you want to enable the TCP MSS Clamp function. If not,
select false.
Click this to save your changes.
Click this to restore your previously saved settings.
DESCRIPTION
Select true if you want to receive RIP version 1 routing information
packets. If not, select false.
Select true if you want to receive RIP version 2 routing information
packets. If not, select false.
Select true if you want to send RIP version 1 routing information
packets. If not, select false.
Select true if you want to send RIP version 2 routing information
packets. If not, select false.
Chapter 6 LAN Setup
83
Advertisement
Table of Contents
