Table of Contents
Advertisement
Chapter 15 Security
The following table describes the labels in this screen.
Table 84 TCP/UDP Port Filter
LABEL
Source address
Destination
address
Protocol
Source port
Destination
port
Direction
Apply
Raw IP Filter
For a non-TCP/UDP port filter, Click Add Raw IP Filter to display the following.
Figure 117 Raw IP Filter
The following table describes the labels in this screen.
Table 85 Raw IP Filter
LABEL
Source address
Destination
address
IP Protocol
188
DESCRIPTION
Enter the source IP address and subnet mask.
Enter the destination IP address and subnet mask.
Select the TCP or UDP from the drop-down list.
Specify the start and end of the source port range for the TCP/UDP
protocol that is to be filtered.
Specify the start and end of the destination port range for the TCP/UDP
protocol that is to be filtered.
Specify whether inbound traffic and outbound traffic is to be allowed or
blocked.
Click this to save your settings.
DESCRIPTION
Enter the source IP address and subnet mask.
Enter the destination IP address and subnet mask.
Specify the protocol number here.
P-794H User's Guide
Advertisement
Table of Contents
