Table of Contents
Advertisement
Chapter 5 System Settings
Table 18 System > SNMP Config (continued)
LABEL
Enable
Wake Up
Enabled
Version
Delete?
Apply
Reset
Create New
Snmp Trap
Community
5.4.5 Creating SNMP Community
Click System > SNMP, then click Create new Snmp Community in the
Existing Snmp Communities section to view the screen as shown. Use this
screen to configure a new SNMP community.
Figure 22 System > SNMP Community: Create
62
DESCRIPTION
Select true to enable this SNMP trap community. Select false to disable
it.
You can wake up the remote SNMP management host if you select true.
Otherwise, select false.
Select the SNMP version for the P-794H. The SNMP version on the P-
794H must match the version on the SNMP manager. Choose SNMP
version 1 (v1) or version 2c (v2c).
Note: SNMP version 2c is backwards compatible with SNMP
version 1.
Select the checkbox to remove a specific community string.
Click Apply to save your changes.
Click Reset to restore your previously saved settings.
Click this if you want to create a new SNMP trap community. See
Section 5.4.6 on page 63
for more information.
P-794H User's Guide
Advertisement
Table of Contents
