Table of Contents
Advertisement
Chapter 5 System Settings
After you see a "Configuration Restored" screen, you can log into the P-794H
again.
Figure 31 Configuration Upload Successful
The P-794H automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your
desktop.
Figure 32 Network Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP
address of your computer to be in the same subnet as that of the default device IP
address (192.168.1.1). See
your computer's IP address.
If the upload was not successful, the following screen will appear.
Figure 33 Configuration Upload Error
5.8 The Restart Screen
System restart allows you to reboot the P-794H remotely without turning the
power off. You may need to do this if the P-794H hangs, for example.
Click System > Restart. Click Restart to have the P-794H reboot. This does not
affect the P-794H's configuration. If you want to clear all user-entered
configuration information and return the P-794H to its factory defaults, select the
68
Appendix B on page 233
for details on how to set up
P-794H User's Guide
Advertisement
Table of Contents
