Sound Field Programs; Selecting Sound Field Programs - Yamaha RX-N600 Owner's Manual

What really creates the rich, full tones of a live instrument are the multiple reflections from the walls of the room. In
addition to making the sound live, these reflections enable us to tell where the player is situated as well as the size and
shape of the room in which we are sitting.
Elements of a sound field
There are two distinct types of sound reflections that combine to make up the sound field in addition to the direct sound
coming straight to our ears from the player's instrument.
Early reflections
Reflected sounds reach our ears extremely rapidly (50 ms to 100 ms after the direct sound), after reflecting from one
surface only (for example, from a wall or the ceiling). Early reflections actually add clarity to the direct sound.
Reverberations
These are caused by reflections from more than one surface (for example, from the walls, and the ceiling) so numerous
that they merge together to form a continuous sonic afterglow. They are non-directional and lessen the clarity of the direct
sound.
Direct sound, early reflections and subsequent reverberations taken together help us to determine the subjective size and
shape of the room, and it is this information that the digital sound field processor reproduces in order to create sound
fields.
If you could create the appropriate early reflections and subsequent reverberations in your listening room, you would be
able to create your own listening environment. The acoustics in your room could be changed to those of a concert hall, a
dance floor, or a room with virtually any size at all. This ability to create sound fields at will is exactly what YAMAHA
has done with the digital sound field processor.

Selecting sound field programs

Notes
• Choose a sound field program based on your listening preference, not merely on the name of the program.
• When you select an input source, this unit automatically selects the last sound field program used with the corresponding input source.
• Sound field programs cannot be selected when the component connected to the MULTI CH INPUT jacks is selected as the input
source (see page 38).
• Sampling frequencies higher than 48 kHz (except for DTS 96/24 signals) are sampled down to 48 kHz and then sound field programs
are applied.
Front panel operations
MASTER
PRESET/TUNING FM/AM A/B/C/D/E
EDIT NEXT
ON OFF
PROGRAM
MAIN ZONE
PHONES SPEAKERS
A B STRAIGHT TONE CONTROL
ON/OFF
EFFECT
SILENT CINEMA
PROGRAM selector
Rotate the PROGRAM selector on the front panel.
The name of the selected sound field program appears in
the front panel display and in the OSD.

SOUND FIELD PROGRAMS

VOLUME
ZONE 2 ZONE
ON/OFF CONTROL
l PRESET/TUNING h
MEMORY TUNING MODE
LEVEL MAN'L/AUTO FM AUTO/MAN'L
INPUT
INPUT MODE MULTI CH
INPUT
VIDEO AUX USB
VIDEO L AUDIO R
Remote control operations
TV VOL TV CH VOLUME
TV MUTE TV INPUT MUTE
STEREO MUSIC ENTERTAIN MOVIE
1 2 3 4
STANDARD SELECT EXTD SUR. DIRECT ST.
5 6 7 8
SPEAKERS ENHANCER NIGHT STRAIGHT
9 0 10 ENT.
EFFECT
PRESET/CH
Set the component selector switch to AMP and
then press one of the sound field program
selector buttons on the remote control
repeatedly.
The name of the selected sound field program appears in
the front panel display and in the OSD.
SOUND FIELD PROGRAMS
AMP
AMP
SOURCE
TV
Sound field program
selector buttons
57
En