Changing The Input Display; Using Headphones; Using Activities To Start Easy Macros - Integra DTR-50.2 Instruction Manual

Note
*1 If Direct listening mode is selected, "Dynamic EQ" and
"Dynamic Volume" cannot be selected.
*2 Only when you have selected "Custom" in the "Picture
59), pressing Enter allows you to adjust the fol-
Mode" (➔
lowing items via the Home menu; "Brightness", "Contrast",
"Hue" and "Saturation". Press Return to return to the origi-
nal Home menu.
*3
Depending on the input source and listening mode, not all
channels shown here output the sound.
*4
When you have entered a custom name in "Name Edit"
(➔ 57), the input source is displayed with that name. But
even if not, the component name may be displayed if the AV
receiver receives it via HDMI connection
*5 For the Port input selector, the name of Universal Port Option
Dock will be displayed.

Changing the Input Display

When you connect an -capable Onkyo component, you
must configure the input display so that
properly.
This setting can be done only from the front panel.
1
Press TV/CD, Game or VCR/DVR so that "TV/
CD", "GAME" or "VCR/DVR" appears on the
display.
2
Press and hold down TV/CD, Game or VCR/DVR
(about 3 seconds) to change the input display.
Repeat this step to select "MD", "CDR", "DOCK"
or "TAPE".
For the TV/CD input selector, the input display
changes in this order:
→
TV/CD
TAPE
For the Game input selector, the setting changes in
this order:
GAME ↔ DOCK
For the VCR/DVR input selector, the setting
changes in this order:
VCR/DVR ↔ DOCK
Note
• DOCK can be selected for the TV/CD, Game or VCR/DVR
input selector, but not at the same time.
• Enter the appropriate remote control code before using the
remote controller for the first time
(➔ 18).
can work
→
MD CDR
→
→
DOCK
(➔ 89).

Using Headphones

Connect a pair of stereo headphones with a stan-
dard plug (1/4 inch or 6.3 mm) to the Phones
jack.
Note
• Always turn down the volume before connecting your head-
phones.
• While the headphones plug is inserted in the Phones jack, the
Headphone indicator, speaker/channel indicator FL and FR
lights. (The Powered Zone 2 speakers are not turned off.)
• When you connect a pair of headphones, the listening mode is
set to Stereo, unless it's already set to Stereo, Mono or Direct.
• Only the Stereo, Direct, and Mono listening modes can be used
with headphones.

Using Activities to Start Easy Macros

You can use Activities to execute a number of remote
control operations with a single button.
This button has the following two modes.
Easy Macro mode:
You can turn on and off the AV receiver, playback
components and TV.
Normal Macro mode:
You can assign desired operations
Note
• If you set any one of the Activities to Normal Macro mode, all
the Activities will be set to Normal Macro mode.
• To use Activities, first assign the remote control codes of the
AV components you are using (
Starting Components Using Activities
Press My Movie, My TV, or My Music.
At purchase, Activities are set to Easy Macro mode
as the default setting.
The default actions are described below.
My Movie:
1. The TV turns on.
2. The playback component assigned to BD/DVD
of Remote Mode turns on.
3. The AV receiver turns on.
4. The input selector of the AV receiver is set to
BD/DVD.
5. Playback begins on the playback component
assigned to BD/DVD.
My TV:
1. The TV turns on.
2. The playback component assigned to CBL/SAT
of Remote Mode turns on.
3. The AV receiver turns on.
4. The input selector of the AV receiver is set to
CBL/SAT.
(➔ 94, 96).
➔
91
).
*1
En
27