Digital Audio Input; Component Video Input - Integra DTR-50.2 Instruction Manual

Note
• For composite video, S-Video, and component video upconver-
sion for the HDMI output, the "HDMI Input" setting must be
set to "- - - - -". See "Video Connection Formats" for more infor-
mation on video signal flow and upconversion
• If no video component is connected to HDMI output (even if the
HDMI input is assigned), the AV receiver selects the video
source based on the setting of "Component Video Input".
• When an HDMI IN is assigned to an input selector as explained
here, the same HDMI IN will be set as a priority in the "Digital
50). In this case, if you want to use the coaxial
Audio Input" (➔
or optical audio input, make the selection in the Audio Selector
in the Home menu (➔
• "TUNER" selector cannot be assigned and is fixed at the
"- - - - -" option.
• If you connect a component (such as UP-A1 Dock that seated
iPod) to UNIVERSAL PORT jack, you cannot assign any input
to "PORT" selector.
• Do not assign the component connected with the HDMI input to
"TV/CD" selector when you set "TV Control" setting to "On"
63). Otherwise, appropriate CEC (Consumer Electronics
(➔
Control) operation will not be guaranteed.

Component Video Input

If you connect a video component to a component video
input, you must assign that input to an input selector. For
example, if you connect your Blu-ray Disc/DVD player to
COMPONENT VIDEO IN 2, you must assign "IN 2" to
the "BD/DVD" input selector.
If you've connected your TV to the AV receiver with a
component video cable, you can set the AV receiver so
that composite video and S-Video sources are upcon-
verted * and output by the COMPONENT VIDEO MONI-
TOR OUT *1 . You can set this for each input selector by
selecting the "- - - - -" option.
*1
Only when "Monitor Out" setting is set to "Analog"
Composite video, S-Video
Composite video, S-Video
Here are the default assignments.
Input selector
BD/DVD
VCR/DVR
CBL/SAT
GAME
PC
AUX
TUNER
TV/CD
PHONO
PORT
En
50
(➔ 22).
26).
Component video
IN
OUT
Component video
Default assignment
IN 1
- - - - -
IN 2
IN 3
- - - - -
- - - - -
- - - - - (Fixed)
- - - - -
- - - - -
- - - - -
■
BD/DVD, VCR/DVR, CBL/SAT, GAME, PC, AUX,
TV/CD, PHONO, PORT
IN 1, IN 2, IN 3:
Select a corresponding component video input that
the video component has been connected.
- - - - -:
Select if you are using HDMI output, rather than the
COMPONENT VIDEO MONITOR OUT, for the
output from composite video, S-Video, and compo-
nent video sources.
Note
• For composite video and S-Video upconversion for the COM-
PONENT VIDEO MONITOR OUT, the "Monitor Out" set-
ting must be set to "Analog"
Video Input" setting must be set to "- - - - -". See "Video Con-
nection Formats" for more information on video signal flow and
upconversion (➔
• If not connected to the same output you have selected in the
"Monitor Out" setting, the "Monitor Out" setting will be auto-
matically switched to "Analog"
• If you connect a component (such as UP-A1 Dock that seated
iPod) to the UNIVERSAL PORT jack, you cannot assign any
input to "PORT" selector.

Digital Audio Input

If you connect a component to a digital audio input, you
must assign that input to an input selector. For example, if
you connect your CD player to the OPTICAL IN 1, you
must assign "OPT 1" to the "TV/CD" input selector.
Here are the default assignments.
Input selector
BD/DVD
VCR/DVR
48).
(➔
CBL/SAT
GAME
PC
AUX
TUNER
TV/CD
PHONO
PORT
■
BD/DVD, VCR/DVR, CBL/SAT, GAME, PC,
TV/CD, PHONO, PORT
COAX 1, COAX 2, COAX 3, OPT 1, OPT 2:
Select a corresponding digital audio input that the
component has been connected.
- - - - -:
Select if the component is connected to an analog
audio input.
Note
• When an HDMI IN is assigned to an input selector in "HDMI
Input" (➔ 49), the same HDMI IN will be set as a priority in this
assignment. In this case, if you want to use the coaxial or optical
audio input, make the selection in the Audio Selector in the
Home menu (➔
• Available sampling rate for PCM signals from a digital input
(optical and coaxial) is 32/44.1/48/88.2/96 kHz/16, 20, 24 bit.
• If you connect a component (such as UP-A1 Dock that seated
iPod) to the UNIVERSAL PORT jack, you cannot assign any
input to "PORT" selector.
(➔ 48), and the "Component
22).
(➔ 48).
Default assignment
COAX 1
COAX 2
COAX 3
OPT 1
- - - - -
FRONT (Fixed)
- - - - - (Fixed)
OPT 2
- - - - -
- - - - -
66).