Table of Contents
Advertisement
My Music:
1. The playback component assigned to TV/CD of
Remote Mode turns on.
2. The AV receiver turns on.
3. The input selector of the AV receiver is set to
TV/CD.
4. Playback begins on playback component
assigned to TV/CD.
Note
• After pressing one of the Activities, you cannot use other
Activities until the assigned actions have been com-
pleted.
• If you wish to use another of the Activities after starting,
press All Off and then press the desired Activities.
*1
Depending on the start-up time of the playback component,
the AV receiver may not be able to activate the playback com-
mand. In this case, press
Turning Off the Components
Press All Off.
The playback component assigned to the last-
pressed Activities, the AV receiver, and the TV turn
*2
off.
*2
When the last-pressed Activities is My Music, the TV will
not turn off.
Changing the Playback Components
Assigned to Activities
You can change the playback components assigned to the
Activities of Easy Macro mode using the following pro-
cedure.
While holding down Remote Mode for the rele-
vant playback component, press and hold down
Activities to which you wish to assign this compo-
nent for about 3 seconds.
Activities will flash twice, indicating that the
change is complete.
Examples:
If you wished to use My Movie to start the playback
component assigned to VCR/DVR of Remote
Mode, you would press and hold down My Movie
for about 3 seconds while pressing down VCR/DVR
of Remote Mode.
Tip
• This procedure can also be performed via onscreen menu
94).
(➔
Restoring Default
1
While holding down Home, press and hold down
All Off until All Off lights (about 3 seconds).
2
Release Home and All Off and press All Off
again.
All Off flashes twice.
En
28
*1
on the remote controller.
Audyssey MultEQ
®
and Speaker Setup
With the supplied calibrated microphone,
Audyssey MultEQ automatically determines the number
of speakers connected, their size for purposes of bass man-
agement, optimum crossover frequencies to the subwoofer
(if present), and distances from the primary listening posi-
tion.
Audyssey MultEQ then removes the distortion caused by
room acoustics by capturing room acoustical problems
over the listening area in both the frequency and time
domain. The result is clear, well-balanced sound for every-
one. Enabling Audyssey MultEQ allows you to also use
®
Audyssey Dynamic EQ
, which maintains the proper
octave-to-octave balance at any volume level
Before using this function, connect and position all of
your speakers.
If "Dynamic EQ" is set to "On"
setting will be set to "Audyssey"
hand, if it is set to "Off", the "Dynamic Volume" setting
will be set to "Off"
(➔
56).
It takes about 30 minutes to complete Audyssey MultEQ
Room Correction and Speaker Setup for 6 positions. Total
measurement time varies depending on the number of
speakers.
Using Audyssey MultEQ
Using Audyssey MultEQ to create a listening environment
in your home theater that all listeners will enjoy,
Audyssey MultEQ takes measurements at up to six posi-
tions within the listening area. Position the microphone at
ear height of a seated listener with the microphone tip
pointed directly at the ceiling using a tripod. Do not hold
the microphone in your hand during measurements as this
will produce inaccurate results.
■
First measurement position
Also referred to as the Main Listening Position this
refers to the most central position where one would nor-
mally sit within the listening environment. MultEQ uses
the measurements from this position to calculate
speaker distance, level, polarity, and the optimum cross-
over value for the subwoofer.
−
■
Second
Sixth measurement positions
These are the other listening positions (i.e., the places
where the other listeners will sit). You can measure up
to 6 positions.
The following examples show some typical home theater
seating arrangements. Choose the one that best matches
yours, and position the microphone accordingly when
prompted.
Room Correction
56).
(➔
(➔
56), the "Equalizer"
(➔
53). On the other
Hide quick links:
Advertisement
Table of Contents
