Table of Contents
Advertisement
DTR-30.1_En_A.book 106 ページ ２００９年４月９日 木曜日 午後１時３０分
Controlling Other Components—Continued
Remote Control Codes for Integra/
Onkyo Components Connected via
Integra/Onkyo components that are connected via
are controlled by pointing the remote controller at the AV
receiver, not the component. This allows you to control
components that are out of view, in a rack, for example.
1
Make sure the Integra/Onkyo component
is connected with an
log audio cable (RCA).
See page 38 for details.
2
Enter the appropriate remote control code
for the Remote Mode button.
• [DVD/BD] button
31612: Integra/Onkyo DVD player with
• [CD] button
71327: Integra/Onkyo CD player with
• [TV/Tape] button
42157: Onkyo cassette recorder with
(default)
• [Port] button
82351: Onkyo Dock (default)
• [Tuner] button
51805: To control the AV receiver's tuner
(default)
See the previous page for how to enter remote
control codes.
3
Press the Remote Mode button, point the
remote controller at the AV receiver, and
operate the component.
If you want to control an Integra/Onkyo component by
pointing the remote controller directly at it, or you want
to control an Integra/Onkyo component that's not con-
nected via
, use the following remote control codes:
• [DVD/BD] button
30627: Integra/Onkyo DVD player without
(default)
• [CD] button
71817: Integra/Onkyo CD player without
(default)
• [TV] button
11807: Integra/Onkyo TV (default)
If you want to control an Integra/Onkyo component by
pointing the remote controller directly at it, use the
following remote control codes:
32900: Integra/Onkyo BD player
32901: Integra/Onkyo HD-DVD player
70868: Onkyo MD player
71323: Onkyo CD recorder
82990: Onkyo Dock
Note:
If you connect an
-capable Onkyo RI Dock to the
TV/Tape, VCR/DVR or Game jacks, for
properly, you must set the Input Display accordingly
(see page 46).
106
Resetting Remote Mode Buttons
You can reset a Remote Mode button to its default
remote control code.
1
cable and an ana-
(3 seconds)
2
Resetting the Remote Controller
You can reset the remote controller to its default settings.
1
(3 seconds)
2
to work
While holding down the Remote
Mode button that you want to
reset, press and hold down the
[Audio] button until the Remote
indicator lights up (about 3 sec-
onds).
Within 30 seconds, press the
Remote Mode button again.
The Remote indicator flashes twice,
indicating that the button has been
reset.
Each of the Remote Mode buttons is
preprogrammed with a remote control
code. When a button is reset, its prepro-
grammed code is restored.
While holding down the
[Receiver] button, press and hold
down the [Audio] button until the
Remote indicator lights up
(about 3 seconds).
Within 30 seconds, press the
[Receiver] button again.
The Remote indicator flashes twice,
indicating that the remote controller
has been reset.
Hide quick links:
Advertisement
Table of Contents
