Controlling A Cd Player - Integra DTR-30.1 Instruction Manual

DTR-30.1_En_A.book 111 ページ ２００９年４月９日 木曜日 午後１時３０分
Controlling Other Components—Continued

Controlling a CD Player

By pressing the Remote Mode button that's been pro-
grammed with the remote control code for your CD
player, you can control your player with the following
buttons.
The [CD] button is preprogrammed with the remote con-
trol code for controlling an Integra/Onkyo CD player.
For details on entering a remote control code for a differ-
ent component, see page 105.
Press the appropriate
Remote Mode button first
On/Standby button
Set the component to On or Standby.
Arrow [ ]/[ ]/[ ]/[ ] and Enter buttons*
Used to navigate menus and select items.
Setup button*
Used to access the Integra/Onkyo CD player's set-
tings.
[ ], [ ], [ ], [ ], [
buttons
Play, Pause, Stop, Rewind, Fast forward, Previous,
and Next.
Repeat button
Used with the repeat playback function.
Search button*
Used to locate specific points.
Number buttons
Used to enter track numbers and times for locating
specific points. The [+10] button works as a +10
button or "--/---" button.
Display button
Displays information about the current disc or track,
including elapsed time, remaining time, total time,
and so on.
Muting button (54)
Mutes or unmutes the AV receiver.
Disc +/– button
Selects discs on a CD changer.
VOL [ ]/[ ] button (52)
Adjusts the volume of the AV receiver.
Random button
Used with the random playback function.
Play Mode button*
Selects play modes on components with selectable
play modes.
CLR button
Cancels functions and clears entered numbers.
Notes:
• Buttons marked with an asterisk (*) are not supported
by the RI control.
• With some components, certain buttons may not work
as expected, and some may not work at all.
], [ ], [ ]
111