Configuring Printer Settings - Kodak HERO 2.2 Extended User Manual

Configuring printer settings

NOTE: When you first power on the printer, the LCD prompts you to select the
Language and Country/Region.
To set or change basic printer settings:
1. Press .
2. Press to select Printer Settings, then press OK.
3. Press to select one of the following settings:
• Date and Time
– Press OK, then press
– Press or
– Press to return to the Printer Settings menu.
• Button Sounds
– Press to select Off, Soft, or Loud .
• Time to Low Power
To conserve energy, your printer will enter a low power (sleep) mode after
being idle for a default delay time of 1 hour. You can increase the delay time to
low power (in 0.5 hour increments) up to 4 hours. Increasing the delay time
may result in reduced energy savings.
– Press to change the time to energy-saving sleep mode (select from 1 to
4 hours in 0.5 hour increments).
• Tagged Images Printing (see
– Press to select Off or On.
• Language
– Press OK, press
• Country/Region
– Press OK, press
• Reset All Settings (see
NOTE: Resetting factory defaults does not change the date and time,
language, country/region, or network settings.
• Printer Info
– Press OK to view the Firmware Version number; press OK when you are
done.
4. Press to return to the Main Menu.
www.kodak.com/go/aiosupport
to select Year, Month, Day, Hour, or Minute.
to change the values; press OK when you are done.
Printing tagged pictures, page
to select a language, then press OK.
to select a country or region, then press OK.
Resetting factory defaults, page
KODAK HERO 2.2 All-in-One Printer
49)
103)
5