Setting Up Your Printer; Selecting A Printer Location; Configuring Printer Settings; Configuring Basic Settings - Kodak ESP 9 Start Here Manual

3

Setting Up Your Printer

Use this chapter to set up and start using your Kodak All-in-One printer.

Selecting a printer location

Place your printer on a clean, flat surface in a dry, well-ventilated location, away from
direct sunlight. Avoid areas with high levels of dust and debris. Do not expose the printer
and paper to ventilation ducts, open doors, or high traffic, as airborne particles can affect
picture quality.
Allow enough space on all sides of the printer to comfortably connect and disconnect
cables, change ink cartridges, as well as remove and load paper.
To ensure getting good signals from your networked computer(s), minimize obstacles
between the network router and the printer (and other wireless devices, such as
Bluetooth–enabled camera phones, etc.). The printer will function best with as clear a "line
of sight" as possible between it and the router.
In addition, keep the printer away from microwaves, and away from 2.4 GHz wireless
telephone handsets.

Configuring printer settings

Printer settings can be adjusted in two ways: via the control panel or the Home Center
software that comes with your printer (see Home Center Help for more details).

Configuring basic settings

1 From the control panel, press

2 Press

3 Press
review the available options and settings, see "Printer settings options" on page 24.

4 Press
Settings
Kodak ESP 9 Printer User Guide
Menu
until is selected, and then press
Printer Settings
until the parameter you want to configure is selected, and then press

or to configure the
, ,
Language Country/Region
.
,
Date and Time Tagged Image Printing
, or
Reset All Settings
.
OK
OK
,
Control Panel
.
. To
23