Copying
Copying a photo
Using the default settings to copy a photo
59
You can copy a photo using the default settings, or you can make adjustments to the
quantity, size, quality, and brightness of your copies.
The default settings are either the factory default settings (see
defaults, page
103), or defaults that you have set on the printer (see Save as
Defaults at the bottom of the table under
photo, page
60).
1. Lift the scanner lid, and place the original photo face down in the right front
corner of the scanner glass.
Do not load photos in the Automatic Document Feeder (ADF).
IMPORTANT:
2. Close the scanner lid.
3. Press
.
4. Press
to select Copy Photo.
5. Press
.
www.kodak.com/go/aiosupport
Resetting factory
Adjusting the settings and copying a