Getting Help On The Web - Kodak HERO 2.2 Extended User Manual

Hide thumbs Also See for HERO 2.2:
Table of Contents

Advertisement

Problem
Cannot send or
receive a fax
Error codes/messages
or other problems you
cannot resolve

Getting help on the Web

Get help with wireless networking.
Search our knowledge base of Answers to
Questions.
Download the latest firmware and software for
optimal printer performance.
Check the Extended User Guide for detailed
instructions and the recommended system
requirements
Get help with problems you cannot resolve.
Possible Solutions
• Make sure that the wall phone line is plugged into the Line in port.
• Verify that the wall jack works by plugging in a phone and checking for a dial tone.
• Verify that Regions is set to the correct country code.
– Press
.
– Press
or
– Press
to select Country/Region, then press OK.
– Press
or
• If you are connected to a DSL phone line, make sure you have a DSL filter connected
to the phone jack.
For more information, go to www.kodak.com/go/hero2_2support.
• Go to www.kodak.com/go/hero2_2support, then type your error code or message.
If you need to contact Kodak (see www.kodak.com/go/contact), have the following
information available:
• Kodak Service Number (located inside the printer when you open the access door)
• Printer model number (located on the front of the printer)
• Computer model, operating system, and version of Home Center Software
• Exact wording of any error message(s) and the error code
For more troubleshooting information:
www.kodak.com/go/aiosupport
to select Printer Settings, then press OK.
to select your country, then press OK.
www.kodak.com/go/inkjetnetworking
www.kodak.com/go/hero2_2support
www.kodak.com/go/hero2_2downloads
www.kodak.com/go/hero2_2manuals
Contact Kodak at
www.kodak.com/go/contact
following information available:
– Kodak Service Number (located inside the printer when
you open the access door)
– Printer model number (located on the front of the printer)
– Computer model, operating system, and version of Home
Center Software
– Exact wording of any error message(s) and the error code
KODAK HERO 2.2 All-in-One Printer
and have the
106

Advertisement

Table of Contents
loading

Table of Contents