ZyXEL Communications P-2612HNU-F1 User Manual page 38

Chapter 3 Tutorials
Connect one end of a DSL cable to the DSL port of your ZyXEL Device. The other
3
end should be connected to the DSL port in your house or a DSL router/modem
provided by your ISP.
Connect one end of Ethernet cable to an Ethernet port on the ZyXEL Device and
4
the other end to a computer that you will use to access the web configurator.
Connect the ZyXEL Device to a power source, turn it on and wait for the POWER
5
LED to become a steady green. Turn on the modem provided by your ISP as well
as the computer.
Account Configuration
Click Network Setting > Broadband to open the following screen. Click Add
1
new WAN Interface.
For this example, the interface type is ADSL and the connection has the following
2
information.
General
Name
Type
Mode
WAN Service
Type
ATM PVC Configuration
VPI/VCI
Encapsulation
Mode
Service
Category
PPP Information
38
MyDSLConnection
ADSL
Routing
PPPoE
36/48
LLC/SNAP-Bridging
UBR without PCR
P-2612HNU-Fx User's Guide