Internet Access - ZyXEL Communications P-2612HNU-F1 User Manual

Chapter 27 Troubleshooting
If this does not work, you have to reset the device to its factory defaults. See
4
Section 27.2 on page
I cannot Telnet to the ZyXEL Device.
See the troubleshooting suggestions for
the web configurator.
I cannot use FTP to upload / download the configuration file. / I cannot use FTP to
upload new firmware.
See the troubleshooting suggestions for
the web configurator.

27.4 Internet Access

I cannot access the Internet.
Check the hardware connections, and make sure the LEDs are behaving as
1
expected. See the Quick Start Guide and
Make sure you entered your ISP account information correctly. These fields are
2
case-sensitive, so make sure [Caps Lock] is not on.
If you are trying to access the Internet wirelessly, make sure the wireless settings
3
in the wireless client are the same as the settings in the AP.
If you are trying to access the Internet wirelessly, make sure you have enabled
4
the wireless LAN by the WPS/WLAN button or the Network Setting > Wireless
> General screen.
Disconnect all the cables from your device, and follow the directions in the Quick
5
Start Guide again.
If the problem continues, contact your ISP.
6
290
287.
I cannot see or access the Login screen in
Ignore the suggestions about your browser.
I cannot see or access the Login screen in
Ignore the suggestions about your browser.
Section 1.6 on page 26.
P-2612HNU(L)-FxF User's Guide