The Wmm Screen - ZyXEL Communications P-2612HNU-F1 User Manual

Table 20 Network Setting > Wireless > WPS (continued)
LABEL
Register
WPS Configuration Summary
AP PIN
Status
Release
Configuration
802.11 Mode
SSID
Security
Apply

6.5 The WMM Screen

Use this screen to enable or disable Wi-Fi MultiMedia (WMM) wireless networks for
multimedia applications.
P-2612HNU(L)-FxF User's Guide
DESCRIPTION
Enter the PIN of the device that you are setting up a WPS connection
with and click Register to authenticate and add the wireless device to
your wireless network.
You can find the PIN either on the outside of the device, or by checking
the device's settings.
Note: You must also activate WPS on that device within two
minutes to have it present its PIN to the ZyXEL Device.
The PIN of the ZyXEL Device is shown here. Enter this PIN in the
configuration utility of the device you want to connect to using WPS.
The PIN is not necessary when you use WPS push-button method.
Click the Generate New PIN button to have the ZyXEL Device create
a new PIN.
This displays Configured when the ZyXEL Device has connected to a
wireless network using WPS or Enable WPS is selected and wireless or
wireless security settings have been changed. The current wireless and
wireless security settings also appear in the screen.
This displays Not Configured when there is no wireless or wireless
security changes on the ZyXEL Device or you click Release
Configuration to remove the configured wireless and wireless security
settings.
This button is available when the WPS status is Configured.
Click this button to remove all configured wireless and wireless security
settings for WPS connections on the ZyXEL Device.
This is the 802.11 mode used. Only compliant WLAN devices can
associate with the ZyXEL Device.
This is the name of the wireless network.
This is the type of wireless security employed by the network.
Click Apply to save your changes.
Chapter 6 Wireless
133