ZyXEL Communications P-2612HNU-F1 User Manual page 75

traffic from A to R and then R routes the traffic to B.This tutorial uses the
following example IP settings:
N1
Table 3 IP Settings in this Tutorial
DEVICE / COMPUTER
The ZyXEL Device's WAN
The ZyXEL Device's LAN
A
R's N1
R's N2
B
To configure a static route to route traffic from N1 to N2:
Click Network Setting > Routing. Click Add New Static Route.
1
Configure the Static Route Setup screen using the following settings:
2
• Select Active.
• Specify a descriptive name for this routing rule.
• Type 192.168.10.0 and subnet mask 255.255.255.0 for the destination, N2.
P-2612HNU-Fx User's Guide
A
IP ADDRESS
172.16.1.1
192.168.1.1
192.168.1.34
192.168.1.253
192.168.10.2
192.168.10.33
Chapter 3 Tutorials
R
N2
B
75