Uploading Firmware; Table 14 The Adapter Screen; Figure 22 Adapter: Upload Firmware - ZyXEL Communications MAX-100 Series User Manual

Wimax pcmcia card

Hide thumbs Also See for MAX-100 Series:

Table of Contents

ZyXEL MAX-100 Series User's Guide

The following table describes the labels in this screen.

LABEL

Version

Image File Name

Progress

Start

3.8.1 Uploading Firmware

Take the following steps to upload new firmware to the ZyXEL Device.

1 Save the new firmware in the ZyXEL Device's directory on your computer. The default

directory is C:\Program Files\ZyXEL\MAX-100 Series\.

If the firmware is in a compressed (.zip) file, you need to decompress (unzip) it. The

ZyXEL Device firmware is a binary (.bin) file.

2 Open the ZyXEL Device utility and click the Adapter tab. Click Start when you are

ready to upload. A window similar to the following appears.

3 Locate the firmware file and click Open.

4 The firmware's filename appears in the Image File Name field. The progress bar

displays how much of the file has uploaded. This may take several minutes.

DESCRIPTION

This is the version number of the firmware the ZyXEL Device is

currently using.

This shows the file name of the firmware you are uploading.

This shows the amount of the firmware file that has been

uploaded.

Note: Do not turn off or remove the ZyXEL Device

while firmware upload is in progress!

Click this to select a firmware file and upload it to the ZyXEL

Device.

Chapter 3 Wireless Configuration

Table of Contents