Onboard Device; Onboard Device Configuration - Foxconn Rattler User Manual

This item determines whether to invoke VGA BIOS post on S3/STR resume.
► S4 and S5 Wake-Up Power Supply
when you select [Disabled], only the power button can wake up the system in S4 and S5 state.
► PS2 KB Wake-Up From S1 and S3
This item is used to enable or disable PS2 key board wake up from S1 and S3 state.
► USB Device Wake-Up Power Supply
This item is used to enable or disable USB devices wake up system from S3,S4,S5 state.
When you set " S4 and S5 Wake-up Power Supply" to [Disabled] and set this item to
[Enabled], only S3 state can be wake up.
► PCI(e) Device Wake-Up Power Supply
This item is used to enable or disable PCI and PCIe devices wake up system from S3,S4,S5
state. When you set " S4 and S5 Wake-up Power Supply" to [Disabled] and set this item to
[Enabled], only S3 state can be wake up.

OnBoard Device

Advanced

Onboard Device Configuration

Realtek 8111E Gigabit LAN 1
Realtek 8111E Gigabit LAN 2
Marvell 6121 PATA and eSATA
NEC USB30 Controller(D720200F1)
VIA 1394 Controller(VT6308S)
Onboard Device Configuration
► Realtek 8111E Gigabit LAN 1/2
This item allows you to enable or disable the onboard Gigabit LAN1/2.
► Marvell 6121 PATA and eSATA
This item allows you to enable or disable the onboard PATA and eSATA ports. We are using
Marvell chip to control PATA and eSATA devices.
► NEC USB3.0 Controller(D720200F1)
This item allows you to enable or disable the NEC USB3.0 controller.
► VIA 1394 Controller(VT6308S)
This item allows you to enable or disable the onboard VIA 1394 device.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
28
Enable or Disable Onboard
Gigabit LAN 1
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit