Maximum Read Request; Aspm Support - Foxconn Rattler User Manual

► Maximum Read Request

This item is used to set the maximum read request size of PCI Express Device, or you can set
[Auto] to allow system BIOS to select the value.
PCI Express Link Settings

► ASPM Support

You can set the ASPM level here:
[Force L0]: Force all links to L0 state.
[Auto]: BIOS auto configure it.
[Disable]: Disable the ASPM.
► Extended Synch
This item is used to allow generation of extended synchronization patterns.
ACPI Settings
Advanced
ACPI Settings
Enable Hibernation
ACPI Sleep State
Lock Legacy Resources
S3 Video Repost
S4 and S5 Wake-Up Power Supply
PS2 KB Wake-Up From S1 and S3
USB Device Wake-Up Power Supply
PCI(e) Device Wake-Up Power Supply
ACPI Settings
► Enable Hibernation
This item is used to enable or disable the hibernation.
► ACPI Sleep State
This item is used to set the energy saving mode of the ACPI function. When you select "S1
(POS)" mode, the power is always on and computer can be resumed at any time. When
you select "S3 (STR)" mode, the power will be down after a period of time. The status of the
computer before it entering STR will be saved in memory, and the computer can quickly return
to previous state when the STR function wakes.When you select "Auto", it means OS will
automatically take care and assign which mode is the most suitable now.
► Lock Legacy Resources
This item is used to enable or disable lock of legacy resources.
► S3 Video Repost
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
[Enabled]
[S3 (Suspend to RAM)
[Disabled]
[Disabled]
[Disabled]
[Enabled]
[Enabled]
[Disabled]
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
27
Enables or Disables System ability to
Hibernate(OS/S4 Sleep State). This
option may
be not effective with some OS.
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit