Onboard Device Configuration; Sas Controller - Foxconn Renaissance User Manual

OnBoard Device Configuration

CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
OnBoard Device Configuration
1394 Controller
Broadcom5786 Lan Controller [Enabled]
Broadcom5786 Lan BOOTROM [Disabled]

SAS Controller

JMicron 36x ATA Controller
HDA Controller
↑↓←→:Move Enter:Select
► 1394 Controller
This item is used to enable or disable the 1394 controller.
► Broadcom5786 Lan Controller
This item is used to enable or disable the onboard Broadcom5786 LAN controller.
► Broadcom5786 Lan BOOTROM
This item is used to enable or disable the onboard Broadcom5786 LAN boot optional ROM.
A LAN boot ROM lets you set up a diskless workstation on the network. By installing a boot
ROM in the network board, you can enable a client PC system on the network to be booted
remotely.
► SAS Controller
This item is used to enable or disable the SAS(Serial Attached SCSI) controller.
► JMicron 36x ATA Controller
This item is used to select the operating mode for JMicron 36x ATA controller. Setting values
are: [Disabled], [IDE Mode], [RAID + IDE Mode] and [AHCI + IDE Mode]. This item is in charge
of the ESATA ports on the back panel and the IDE connector on board.
► HDA Controller
This item is used to enable or disable the HD Audio Controller.
OnBoard Device Configuration
[Enabled]
[Enabled]
[IDE Mode]
[Enabled]
+/-/:Value F10:Save ESC:Exit
F9:Optimized Defaults
28
Help Item
Options
Enabled
Disabled
F1:General Help