Foxconn Rattler User Manual page 105

9. Windows will display the partition of your system, you have to create partitions as
many as you wish, assign them C:, D: or E: drive names. After partitions were done,
you can press <Enter> to continue. It will ask you to format your hard disk, then
copy files...etc., until the whole Windows is setup.
Windows XP Professional Setup
The following list shows the existing partitions and
unpartitioned space on this computer.
Use the UP ad DOWN ARROW keys to select an item in the list.
305251 MB Disk 0 at id 0 on bus 0 on iaStor [MBR]
ENTER=Install
10. You must always keep RAID diskette in the floppy drive during Windows XP
installation, otherwise, Windows may ask you to put it inside again by below
message. There are many times Windows XP may copy files from the floppy drive,
please remember.
11. Follow the Windows XP install processes to finish the set up.
Windows XP Professional Setup
F3=Quit
● To set up Windows XP on the selected item, press ENTER.
● To create a partition in the unpartitioned space, press C.
● To delete the selected partitions, press D.
Unpartitioned space
C=Create Partition
Insert the disk labeled:
Intel Matrix Storage Manager driver
* Press ENTER when ready
ENTER=Continue
305251 MB
F3=Quit
into drive A:
98