Foxconn Rattler User Manual page 104

7. Depending on South Bridge chip of your system, select appropriate driver for
it. Here, because the SATA mode is set to RAID, we choose "Intel(R) Desktop/
Workstation/Server Express Chipset SATA RAID Controller" . Press <Enter> to
select it.
If the SATA mode in BIOS is set to AHCI, this screen will show different drivers, and
we need choose "Intel(R) Desktop/Workstation/Server Express Chipset SATA AHCI
Controller".
Windows Setup
You have chosen to configure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.
Intel(R) ICH7R/DH SATA RAID Controller
Intel(R) ICH7MDH SATA RAID Controller
Intel(R) Desktop/Workstation/Server Express Chipset SATA RAID Controller
Intel(R) ICH8R/ICH9R/ICH10R SATA RAID Controller
Intel(R) Mobile Express Chipset SATA RAID Controller
ENTER=Select
8. A confirmation message pops out to double check if the driver is really what we
wanted. Press <Enter> to continue.
Windows Setup
Setup will load support for the following mass storage device(s):
Intel(R) Desktop/Workstation/Server Express Chipset SATA RAID Controller
* To specify additional SCSI adapters, CD-ROM drivers, or special
disk controllers for use with Windows, including those for
which you have a device support disk from a mass storage device
manufacturer, press S.
* If you do not have any device support disks from a mass storage
device manufacturer, or do not want to specify additional
mass storage devices for use with Windows, press ENTER.
S=Specify Additional Device
F3=Exit
ENTER=Continue
97
F3=Exit