Foxconn Rattler User Manual page 90

Create Recovery
1. Select "1.Create RAID Volume" from the main menu and press <Enter>.
2. In "Name" item, you can input a device name for the Recovery system and press
<Enter> to apply it. Here, we name it as TryRecovery to replace the default Volume0.
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
3. In "RAID Level" item, you can use Up or Down arrow key to make a selection.
Select Recovery and press <Enter>.
Intel(R) Matrix Storage Manager option ROM v5.0.0.1011 ICH9R wRAID5
Intel(R) Rapid Storage Technology - Option ROM - 10.0.0.1032
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.
Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
[ CREATE VOLUME MENU
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Sync:
Enter a unique volume name that has no special characters and is
16 characters or less.
[↑↓]-Change [TAB]-Next
Intel(R) Rapid Storage Technology - Option ROM - 10.0.0.1032
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved. Copyright(C) 2003-04 Intel Corporation All Rights Reserved.
[ CREATE VOLUME MENU
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Sync:
Recovery: Copies data between a master and a recovery disk.
[↑↓]-Change [TAB]-Next
]
Volume0
TryRecovery
RAID0(Stripe)
Select Disks
128KB
0.0 GB
N/A
Create Volume
[ HELP ]
[ESC]-Previous Menu
]
TryRecovery
Recovery
Recovery
Select Disks
N/A
0.0 GB
Contious
Create Volume
[ HELP ]
[ESC]-Previous Menu
83
[ENTER]-Select
[ENTER]-Select