Install A New Windows Xp - Foxconn Rattler User Manual

5-4 Install a New Windows XP

!
When set the SATA Mode in BIOS to IDE, you can install Windows XP directly.
When set the SATA Mode in BIOS to either AHCI or RAID, you need to
follow the following steps to install Windows XP.
1. Press <DEL> to enter BIOS Setup during POST.
2. Insert the Windows installation CD into the optical drive.
3. Set the "Boot Option #1" to "SATA: ATAPI DVD ...", save changes and exit the BIOS
setup.
Main Advanced Chipset Boot
Boot Configuration
Setup Prompt Timeout
Bootup Numlock State
Quiet Boot
Fast Boot
CSM16 Module Version
Option ROM Messages
Interrupt 19 Capture
HDD BootSector Write
ZIP Emulation Type
Boot Option Priorities
Boot Option #1
Hard Drive BBS Priorities
4. The computer will reboot, and it will start installing Windows Operating System.
Watch the screen carefully, when the following picture appears, press <F6> key
immediately. If you forgot to do this, PC will go to an fatal blue screen, and you
may need to reboot the system again. PC may not respond to your <F6> input
immediately, and it keeps loading files until the next screen displays.
Windows Setup
Press F6 if you need to install a third party SCSI or RAID driver.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Boot
Security Save & Exit Quantum BIOS
1
[On]
[Enabled]
[Disabled]
07.64
[Force BIOS]
[Disabled]
[Normal]
[Floppy]
[SATA: ATAPIDVD ...]
Version 2.10.1208. Copyright (C) 2010 American Megatrends, Inc.
95
Sets the system boot order
→ ←: Select Screen
↑ ↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit