System Information - Foxconn Cinema II Deluxe User Manual

System Information

This sub-menu is used to set up the standard BIOS features, such as the date, time, floppy drive
and so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change
the setting.
CMOS Setup Utility - Copyright (C) 1985-2009, American Megatrends, Inc.
System Time
System Date
► SATA Port 1
► SATA Port 2
► SATA Port 3
► SATA Port 4
► eSATA Port
Halt On
Keyboard
Mouse
System Overview
BIOS Information
Mainboard Model
BIOS ID
BIOS Build Date
↑↓←→:Move Enter:Select
► Time (hh:mm:ss)
This item allows you to configure the desired time. Use [ENTER] to enter the setting, then use
[TAB] to move forward a field. Use [+] or [-] to input the value.
The three fields of the setting are <hour> : <minute> : <second> respectively.
► Date (mm:dd:yy)
<weekday><month><date> <year> format.
Day—weekday from Sun. to Sat., this message is automatically displayed by BIOS (Read
Only).
Month—month from 1 to 12.
Date—date from 1 to 31.
Year—year, set up by users.
Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to input the value.
► SATA Port 1 / SATA Port 2 / SATA Port 3 / SATA Port 4 / eSATA Port
When OnChip SATA Type is set to [Native IDE], while entering setup, BIOS automatically
detects the presence of SATA devices.
SATA Port 1 is the lower SATA port of SATA1_SATA2 of the motherboard.
SATA Port 2 is the upper SATA port of SATA1_SATA2 of the motherboard.
SATA Port 3 is the lower SATA port of SATA3_SATA4 of the motherboard.
SATA Port 4 is the upper SATA port of SATA3_SATA4 of the motherboard.
E-SATA Port is on the motherboard.
► Halt On
This category determines whether or not the computer will stop if an error is detected during
powering up.
[All Errors] : All errors can result in system halt.
[All Errors But...] : All errors but keyboard or mouse can result in system halt. The halt condi-
System Information
[11 : 59 : 49] 12
[Sun 04/26/2009]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[All Errors, But ...]
[Disabled]
[Disabled]
: Cinema II
: 941F1P01
: 07/01/09
+/-/:Value F10:Save
F2/F3:Change Colors F9:Optimized Defaults
21
Help Item
Use [Enter], [TAB]
or the a torrow keys to
select a field.
Use [+] or [-] to
configure the system
time.
ESC:Exit F1:General Help