Install The Cpu And Cpu Cooler - Foxconn Cinema II Deluxe User Manual

2-1 Install the CPU and CPU Cooler

!
Read the following guidelines before you begin to install the CPU :
■ Make sure that the motherboard supports the CPU.
■ Always turn off the computer and unplug the power cord from the power supply before
installing the CPU to prevent hardware damage.
■ Locate the Pin-1 of the CPU. The CPU cannot be inserted if oriented incorrectly.
■ Apply an even and thin layer of thermal grease on the surface of the CPU.
■ Do not turn on the computer if the CPU cooler is not installed, otherwise overheating
and damage of the CPU may occur.
■ Set the CPU host frequency in accordance with the CPU specifications. It is not
recommended that the system bus frequency be set beyond hardware specifications
since it does not meet the standard requirements for the peripherals. If you want to
set the frequency beyond the standard specifications, please do so according to your
hardware specifications including the CPU, graphics card, memory, hard drive, etc.
Install the CPU
Locate the Pin-1 CPU triangle mark and the Pin-1 of the CPU socket.
1. Release the CPU socket lever.
Pin-1 corner of the
CPU socket
2. Align Pin-1 of the CPU with the CPU
socket, and gently put the CPU
onto the socket.
8
Pin-1 triangle
marking of CPU