System Information - Foxconn A7GMP-S User Manual

System Information

This sub-menu is used to set up the standard BIOS features, such as the date, time, floppy drive
and so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change
the setting.
Date (mm:dd:yy)
Time (hh:mm:ss)
► IDE Master
► IDE Slave
► SATA1#
► SATA2#
► SATA3#
► SATA4#
► SATA5#
► E-SATA#
Floppy A
Halt On
Keyboard
Mouse
Floppy
Model Name
BIOS ID
↑↓←→:Move Enter:Select
► Date (mm:dd:yy)
<weekday><month><date> <year> format.
Day—weekday from Sun. to Sat., this message is automatically displayed by BIOS (Read
Only).
Month—month from 1 to 12.
Date—date from 1 to 31.
Year—year, set up by users.
Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to input the value.
► Time (hh:mm:ss)
This item allows you to configure the desired time. Use [ENTER] to enter the setting, then use
[TAB] to move forward a field. Use [+] or [-] to input the value.
The three fields of the setting are <hour> : <minute> : <second> respectively.
► IDE Master / Slave
While entering setup, BIOS automatically detects the presence of IDE devices.
► SATA1# / SATA2# / SATA3# / SATA4# / SATA5# / E-SATA#
When OnChip SATA Type is set to [Native IDE], while entering setup, BIOS automatically
detects the presence of SATA devices.
SATA1# is the SATA port 1 of the motherboard.
SATA2# is the SATA port 2 of the motherboard.
SATA3# is the SATA port 3 of the motherboard.
SATA4# is the SATA port 4 of the motherboard.
SATA5# is the SATA port 5 of the motherboard.
E-SATA# is SATA port E_SATA 1 of the motherboard.
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
System Information
: A7GMP-S
: 871F1P01
+/-/:Value
F9:Optimized Defaults
[Mon , 09 /22/2008]
[11 : 59 : 49]
[Not Detected] Use [Enter], [TAB]
[Not Detected] or [SHIFT-TAB] to
[Not Detected] select a field.
[Not Detected]
[Not Detected] Use [+] or [-] to
[Not Detected] change system Date.
[Not Detected]
[Not Detected]
[1.44 MB 3 / ]
1
2
[All Errors, But ...]
[Disabled]
[Disabled]
[Disabled]
F10:Save ESC:Exit
21
Help Item
F1:General Help