System Information - Foxconn A74GA Series User Manual

System Information

This sub-menu is used to set up the standard BIOS features, such as the date, time, floppy drive
and so on. Use the arrow up/down keys to select an item, then use the <+> or <-> keys to change
the setting.
CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc.
Date (mm:dd:yy)
Time (hh:mm:ss)
► IDE Master
► IDE Slave
► SATA1#
► SATA2#
► SATA3#
► SATA4#
► SATA5#
► SATA6#
Halt On
Keyboard
Mouse
Model Name
BIOS ID
BIOS Version
Memory Size
↑↓←→:Move Enter:Select
► Date (mm:dd:yy)
<weekday><month><date> <year> format.
Day—weekday from Sun. to Sat., this message is automatically displayed by BIOS (Read
Only).
Month—month from 1 to 12.
Date—date from 1st to 31st.
Year—year, set up by users.
Use [ENTER], [TAB] or [SHIFT-TAB] to select a field. Use [+] or [-] to input the value.
► Time (hh:mm:ss)
This item allows you to configure the desired time. Use [ENTER] to enter the setting, then use
[TAB] to move forward a field. Use [+] or [-] to input the value.
The three fields of the setting are <hour> : <minute> : <second> respectively.
► IDE Master/Slave, SATA1#/SATA2#/SATA3#/SATA4#/SATA5#/SATA6#
While entering setup, BIOS automatically detects the presence of IDE devices. This item
displays the drive information of IDE devices.
► Halt On
This category determines whether or not the computer will stop if an error is detected during
powering up.
[All Errors] : All errors can result in system halt.
[All Errors But...] : All errors but keyboard or mouse or floppy can result in system halt. The
► Keyboard
The system boot will not stop for a keyboard error if you enabled this item.
► Mouse
The system boot will not stop for a mouse error if you enabled this item.
System Information
[Thu ,
[10 : 59 : 49]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[Not Detected]
[All Errors But ...]
[Disabled]
[Disabled]
:A74GA
:A22F1P02
:08.00.15
:1024MB
+/-/:Value
F9:Optimized Defaults
halt condition can be enabled/disabled in the next two settings.
05
/13/2010] Help Item
Use [Enter], [TAB]
or [SHIFT-TAB] to
select a field.
Use [+] or [-] to
configure system Date.
F10:Save ESC:Exit
24
F1:General Help