Foxconn Cinema II Deluxe User Manual page 22

CoM Connector : CoM1
This motherboard supports one serial RS232 COM port for
legacy compatibility. User must purchase another RS232
cable with a 9-pin D-sub connector at one end to connect
with the external RS232 device and another end with 10-
pin female connector to connect with COM1 connector in
the motherboard.
1394a Connector : f_1394 (only for Cinema II
Deluxe)
The 1394a expansion cable can be connected to either
the front (provided that the front panel of your chassis is
equipped with the appropriate interface) or real panel of
the chassis.
IrDA Connector : IR
This connector supports infrared wireless transmitting and
receiving device.
USb Connectors : f_USb1/2/3
In addition to the six USB ports on the rear panel, this
product also provides three 10-pin USB headers on its
motherboard. By connecting through USB cables with
them, user can quickly expand another six USB ports on
the front panel.
1
5V_DUAL
D-
D+
GND
EMPTY
9
F_USB 1/2/3
Serial ATA Connectors : SATA_1/2/3/4
The Serial ATA connector is used to connect with SATA
Hard Disk or CD devices which supporting this feature.
The current Serial ATA II interface allows up to 300MB/s
data transfer rate.
2
5V_DUAL
D-
D+
GND
NC
10
EMPTY
15
2
1
RLSD SIN
SOUT DTR
GND
DSR
RTS
CTS
RI EMPTY
9 10
COM1
1
2
TPA+
TPA-
GND
GND
TPB+ TPB-
+12V
+12V
GND
9 10
F_1394
1
+5V
2
EMPTY
3
IRRX
4
GND
5 IRTX
IR
GND TX- RX- GND
TX+ GND RX+
1
SATA_1/2/3/4